
As I mentioned in the Vitus 979 Jan Janssen article, I own several of these 979 framesets. The Jan Janssen came out so well that I decided to build another. That was toward the end of summer, shortly before the VeloWino ride my wife and I had planned to join.
Our own road bikes are newer and do not qualify for classic rides like that. I planned to ride the Jan Janssen Vitus, and my wife would get a smaller red Vitus 979. That settled the frame choice for the next build.
Like the Jan Janssen, this frame had been in storage for a long time and needed dusting and polishing. It was in equally good condition.
This model was made before 1985, as you can tell by its conventional seat clamp. From 1985 onward, Vitus held the seatpost in place with a grub screw.
I wanted to build it with a lovely Campagnolo Triomphe groupset, polished to a mirror finish and personalised with machined details. It had to look good alongside the Jan Janssen. First I pressed in the headset so the fork could be secured to the frame.
I pressed in the cups with the correct tool, then assembled and adjusted the bearings using a special grease.
The rear derailleur stayed original, with no machining or drilling. I stripped it completely, polished it and reassembled it.
Next I machined the crankset, stem, brake levers and seatpost.
First came the Cinelli stem, which I paired with a matching Cinelli handlebar with a crest. I polished both to a mirror finish and milled a V for Vitus into both sides of the stem.
Next I machined the sides of both crank arms. With such a smooth crank design, it is difficult to add machining without it looking out of place. This was the one treatment that worked for me.
I added colour to the machined recesses and polished the crankset and chainring. The photos still show fingerprints from installing the bottom bracket and crankset.
I polished the brakes to a mirror finish and fitted a ruby-red stone. The brake levers were also fully polished and machined.
I forgot to photograph the brake levers separately, but they are visible in the photos of the finished bike. The same goes for the customised Campagnolo seatpost.
To finish the bike I wrapped the bars in white Benotto tape. The brake levers received new brown hoods to match the Rolls saddle.
I used new cables with white housings. The wheels have new-old-stock Wolber Gentleman GTA rims on Campagnolo hubs, with new-old-stock Wolber SL 20 Coton tyres. The chain is also new.
I replaced the straps on the Campagnolo pedals with new brown leather Christophe straps.
I filmed the completed bike so you could see it in motion. Before filming I fitted new red decorative nuts to the brake callipers. They look even better than the previous ones.
Here is the finished bike in the sun.






































