
I bought this beautiful Garlatti road bike some time ago. The chrome-plated lugs, rear triangle and fork were the main attraction. Some components were original, but others had been swapped to convert the bike into a tourer. Here is a photo of the bike as I found it:

The photo shows what had happened to the bike. It had an awkward handlebar and stem combination, non-original brake levers, lights, steel rims with touring tyres, a rubber saddle and plastic pedals.
The worst part was the bottle cage. Two large hose clamps held it to the down tube and left visible marks in the paint.
The rest of the bike was still original. That included the Campagnolo shifters and both derailleurs, the steel crankset and bottom bracket, the Universal brakes, the seatpost and the headset.
It needed a replacement stem, handlebar, brake levers, saddle, pedals and wheels, as well as a new freewheel.
I stripped the bike, cleaned all the parts and regreased the bottom bracket and headset. I cleaned the damaged areas of paint and sealed them with clear coat. I chose to leave the marks visible because matching the colour would be difficult and the wear is part of the bike’s history.
Once everything was clean, I looked for wheels. The rear spacing is 120 mm, and I wanted Campagnolo hubs and aluminium rims. I chose high-flange Campagnolo Nuovo Tipo hubs laced to slightly wider Weinmann aluminium rims. They suit a bike intended for Eroica or other classic cycling events, which often leave smooth tarmac. The rims work well with tyres 25 mm wide or more.
A suitable cockpit was essential to bring it back to road-bike form. I had several handlebars and plenty of stems from the mid-1970s through the 1990s, but only one stem suited the period and the look of this bike. It had been listed separately in the shop before I fitted it to the Garlatti.
The original levers were gone, so I found a pair of Universal levers to match the original Universal callipers and fitted new hoods. I assembled the stem, handlebar and levers and wrapped the bars in red Benotto tape. The red complements details such as the outline around the Garlatti name on the down tube.
I chose a well-preserved Selle Royal S17 genuine leather saddle.
With Eroica and other classic rides in mind, I fitted new-old-stock Panaracer TourGuard tyres with Kevlar. At 28 mm wide they still look sporty and can handle rougher surfaces.
The 28 mm Panaracer TourGuard tyres featured in the original shop listing are sold out.
I fitted a freshly serviced five-speed Regina Extra freewheel. It sounds wonderful.
The bar tape, hoods, tyres, tubes, cables, housings and chain are all new.
Here is a video of the finished bike so you can see it in motion:



















