
CLASSIC ROAD BIKE GROUPSETS · 1987 MODEL YEAR
With the Shimano 105 1050 series, the Golden Arrow gained a successor whose shifting you could hear and feel. The right downtube lever indexed across six sprockets. The front retained a conventional friction lever, and riders who preferred to position the rear lever by feel could switch it to friction as well.
- Position — Second generation of Shimano 105, following Golden Arrow
- Period — From the 1987 model year to around 1989. Shimano instructions are dated as early as July 1986.
- Shifting — Two chainrings and six sprockets in the original SIS configuration
- Identification — 1050 model codes, SIS downtube shifters and Biopace chainrings on some builds
1987 to 1989 | From Golden Arrow to Shimano 105 with SIS
Golden Arrow had established 105 as a sporting road group below Shimano 600. On the 1050, the lever, rear derailleur and sprocket spacing worked as a system so each click moved one gear. Early technical documents date from 1986, while 1987 is the model year in which the components appear in contemporary bicycle catalogues. The later 1051 and 105 SC designations should be considered separately when identifying parts. Shimano groupset history · 1987 Mongoose catalogue
In December 1986 Shimano introduced the group as New Shimano 105 for sporting and recreational riders. Shimano highlighted three developments: SIS indexed shifting, non-round Biopace chainrings and the matched Shimano Linear Response braking system. The catalogue shows how Shimano positioned it.


Shifting | Rear derailleur, front derailleur and levers
RD-1050 rear derailleur
The RD-1050 moves the chain across the rear sprockets. Shimano specifically pairs it with the SL-1050 for the original six-speed indexed setup. On a bike that has been modified over decades, check the stamped model number and count the sprockets. A 105 logo alone does not identify the generation.
FD-1050 front derailleur
The front derailleur shifts between the two chainrings. The left lever allows small adjustments if the chain rubs the cage in an awkward gear. A surviving set documents the FD-1050 in braze-on form. When finding a replacement, check the frame’s actual mounting arrangement.
SL-1050 downtube shifters
The right lever offers six-speed Shimano Index System, or SIS, and a selectable friction mode. In SIS each click holds a defined position. In friction mode the rider positions the lever continuously by hand. Shimano gives a weight of 71 grams for the documented braze-on version. The instructions also list matching rear-wheel and cable components. Shimano SL-1050 instructions
Brakes | BR-1050, BL-1050 and BL-1051
BR-1050 brake callipers
The side-pull brakes came in two reaches. The short BR-1050-49 covers 39–49 mm and the longer BR-1050-57 covers 47–57 mm. This is the distance from the fixing axis to the brake shoe. On a classic frame, the distance to the rim’s braking track determines which calliper fits. Shimano lists 170 grams front and 165 grams rear for the short recessed-mount version.
Brake levers and Shimano Linear Response
Shimano documents BL-1050 and BL-1051 levers with aero cable routing. This runs the cable along the bar, where it can sit under the tape. For SLR, Shimano matched the brake’s return forces to the relevant levers and housings. The difference becomes apparent when you consider the lever and calliper together. Shimano brake and lever instructions
Crankset and bottom bracket | FC-1050 and BB-1050
FC-1050 crankset
The double crankset has a 130 mm bolt circle. Shimano documents round chainrings as well as non-round Biopace rings, whose shape is clear from the side. Shimano’s weight example for 52/42 is 690 grams with 170 mm cranks. The instructions also list a 53-tooth outer ring and crank lengths from 162.5 to 175 mm.
BB-1050 bottom bracket
The traditional bottom bracket fits a square-taper crankset. Shimano lists, among other options, a 113 mm spindle for a 68 mm shell and a 115 mm spindle for a 70 mm shell. The instructions cover English, French and Italian cup threads. For a bare steel frame, check shell width, thread and spindle length separately. Shimano gives a 43.5 mm chainline for the documented combination. Shimano installation instructions for FC-1050 and BB-1050
Headset, hubs and pedals
HP-1050 headset
The group had a conventional threaded headset. The HP-1050 appears on a 1987 Mongoose road bike specification. When changing frames, check the fork thread and bearing-seat diameters.
Hubs and six sprockets
The SIS instructions list the FH-1050 as a compatible six-speed rear component. The HB-1050-R has an exploded drawing showing the axle, cones and quick release. The model codes make it easier to identify a surviving wheel’s build. Shimano HB-1050-R exploded view
Pedals and small parts
Pedals, quick releases, stops and downtube lever covers all matter when identifying a complete collector’s bike. Shimano shows different lever covers for different frame mounts. Small variations can therefore be original.


What changed for riders
The transition is most obvious at the downtube: riders once found the next sprocket by feel, while SIS did the positioning with each click. Friction remained available. The fact that Mongoose already listed the 1050 on a production bike shows how quickly the system reached the sporting midrange. That does not establish what period reviewers thought of it. Original 1987 Mongoose catalogue
Verdict | A 105 groupset for classic steel road bikes
The 1050 suits a build where silver components, slim side-pulls and downtube shifters are part of the bike’s character. A matching RD-1050, SL-1050 and six sprockets let you experience indexed and friction shifting on the same bike. The Golden Arrow article has useful comparison photos.
Pingback: Shimano 105 SC 1055: From Downtube Shifters to STI Brake/Shift Levers – VeloDeluxe – Classic Road Bikes and Parts